Description
- intuitive and simple directions screen for easy operation
- Automatic door opening
- Four preprogrammed sterilization cycles nonenveloped, packaged, packaging and handpieces
- Programmable controls allow you to change the exposure time, temperature, drying time and cooling, and store changes if desired
- Air pressure steam extraction system designed to press Ensure adequate steam penetration
- The LCD display alerts the operator if the door is not completely closed or the water level in the tank is low
- Filling orifice of the tank and drain tube located in the front of the unit to Facilitate drainage and filling
Midmark Ritter M11 Specifications
Dimensions
- Total length with plug: 23.8 “(60.5 cm)
- Overall width: 17.8 “(45.2 cm)
- Total height with printer: 17.8 “(45.2 cm)
- Minimum worktop surface: 21 “(53.3 cm) D x 17.8” (45.2 cm) W
Camera
- 11 “diameter (28 cm)
- 18 “deep (45.7 cm)
- Usable volume of 6.5 gallons (24.6 liters)
trays
- Two large – 9 “W x 15” L x 1.1 “D (22.9 cm x 38 cm x 2.9 cm)
- Two small – 6.6 “W x 15” L x 1.1 “D (16.8 cm x 38 cm x 2.9 cm)
- Unit weight: 99 lb (44.9 kg)
- Shipping Weight: 131 lb (59.4 kg)
- Water tank capacity: 1.4 gal (5.3 liters)
Electrical requirements
- 115 VAC, 50/60 Hz, 15 Amps Monophasic
- 115 VAC heater is 1425 watts tubular immersion
- 230 VAC, 50/60 Hz, 10 Amps Monophasic
- 230 VAC has a tubular 1500W immersion heater
Safety standards
- UL listed to Canadian standards and estadounidensesUL 61010-1, 2nd Edition
- IEC 61010-2-040, 1st edition
- CAN / CSA C22.2 No. 61010-1, 2nd Edition
- CSA C22.2 No. 61010-2-040-07, part 2-040, First Edition
- Meets the requirements of ASME Boiler and Pressure Vessel Code
- a separate circuit (dedicated) is recommended for esta sterilizer