CareFusion Alaris Syringe Pump Module BD 8110

The syringe pump modules and are designed for installations using infusion pumps and / or syringes for the delivery of fluids, drugs, blood and blood products by Continuously or intermittently through clinically acceptable routes administration administration; Such as intravenous (IV), intraarterial (IA), subcutaneous, epidural, irrigation or enteral fluid spaces. Modules and syringe pump Indicated for use are in adults, pediatrics and neonates. They can connect up to four pump modules and / or syringe to Alaris system.

  • The syringe module is Intended for installations using infusion for delivering fluids, drugs, blood and blood products by Continuously or intermittently through clinically acceptable routes of administration (eg, intravenous, intra-arterial or enteral) administration.
  • The module use a single disk syringe pressure detection alarm Shortens the time Accurately line pressure monitors, you reduce delays the start of infusion and bolus involuntary release of the Decreases after occlusion.

Description

Bolus volume, maximum after occlusion

Diskless pressure sensing

  • Adjustment under pressure: 0512 Bolus Volume (mL)
  • Adjusting Means pressure: 0776 Bolus Volume (ml)
  • High pressure adjustment: 1103 Bolus Volume (mL)

With pressure sensing disc

  • 300 mmHg pressure setting: deactivated Backspace: 0462; Back Off Enabled: 0.126 500 mmHg pressure adjustment: Kick Off: 0.575; Back Off Enabled: 0331 1000 Pressure Adjustment mmHg: Back Off Disabled: 0839; Go Back On: 0.323

critical volume

  • That can Occur Overinfusion maximum in case of a fault condition not only Exceed 2% of the nominal fill volume of the syringe During loading and 1% of full travel of the syringe after the syringe loading.

Dimensions

  • 4.5 “An. X 15.0” W. X 7.5 “W.